Water Joy Spa Pedicure Chair

Water Joy Spa Pedicure Chair, Best Price On The Web.

• Water Supply: All plumbing connections must conform to local codes. Water supply to the spa should be provided with adequate water pressure and water temperature.
• Water pressure: To fill the basin correctly up to level, Normal water pressure should be between 30 to 80 P.S.I.
• Water temperature: The hot water supply temperature must not exceed 140℉. Adjust your hot water accordingly. For hot and cold water supplyfittings and drain fittings location, see below diagram. Carefully connect the water supply line to the appropriate fittings locatedon the rear of the pedicure spa.
• Backflow Preventive Device: This Device is optional, therefore yot need to order seperately. Salontech does not guarantee the quality of this device.
• SpecificationBackflow preventive device for faucet: Vacuum breaker comply with ANSI / NSF – 61 – 2000, ASMB A112.18.1 – 2000,ASSE1014 and CSA standard
• B125.98ANSI / ASME A112.18.3M (performance requirements for backflow preventive device and systems in plumbing fixture fittings) isapplicable to plumbing fixture fittings with outlets not protected by an air gap. Included in the possible range of applications arefittings with hose connected outlets, fitting with pull out spout, hand held showers, shampoo fittings and deck mounted fittings.ASME A112.18.3M is now referenced in ASME A112.18.1M (plumbing fixture fittings) and CSA B125. Backflow preventive devicesare listed to both standards with the Canadian Standard Association, IAPMO and UL.ANSI
• American National Institute. ASME – American Society of Mechanical Engineers. CSA
• Canadian Standard Association.APMO
• International Association of Plumbing and Mechanical Officials. UL – Underwriters Laboratory.
• The maximum weight capacity for the massage chair is 250lbs.

Specifications:

• Water Joy (Base Unit): 29”W X 51”L X 16”H Wt. 165Lbs
• Water Joy (Chair): 22”W X 34 1.2”L(Incline), 50”L(Recline) X 44”H(Incline), 34”H(Recline) Wt. 125Lbs
• Stool: 19”W X 19”L X 22”H Wt. 13Lbs
• JJT Dual Impeller Motor Jets: Hydro Therapeutic Motor Jet with Dual Impeller System
• Air Control: Air Induction System
• Motor: 115V 1.2 Amp 60Hz 55W / Each Motor
• Swithch: On / Off Air activated switch
• Capacity of Tub: 4.25 US Gallon
• Discharge Pump (optional): 115V 3.2 Amp 60Hz
• Massage System: 110V – 120V 60Hz 90W 5Amp
• Hot Water: 1/2 inch (fitting pre-installed) / 3/8 PIP Connection
• Cold Water: 1/2 inch (fitting pre-installed) / 3/8 PIP Connection
• Drain: 1 – 1/2 inch (see plumbing instruction)
• Unit 1 Year warranty